Huawei HG622 Manuel d'utilisateur

HUAWEI HG622 Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD.

2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figur

2.3 Connecting Multiple Telephones If your telephone line is used for the broadband network access, telephone connections, and fax connections, take t

2.4 Powering On To power on the HG622, press the ON/OFF button on the side panel of the HG622. After you power on the HG622, the DSL indicator blinks

Step 1 Click Advanced > PIN in the navigation tree to display the PIN Page. Step 2 Enter the original PIN number in the PIN text box. Step 3 Click

Step 4 Set LAN parameters. 1. In the navigation tree, choose Basic > LAN. 2. Set the IP address and Subnet mask of the LAN connection. 3. Select

You need to perform the preceding operations only once for creating a network connection. After the network connection is created, to access the netwo

The WPS indicator of the HG622 becomes on from the blinking state, indicating that the HG622 is connected to your PC through the WLAN. This state last

5. Click OK to close the dialog box, and then close the Computer Management window. Step 3 Configure the wireless network connection on your compute

Step 5 Click Submit to save the settings. After you change the password successfully, the current page jumps to the page for logging in to the Web-bas

Step 5 Enter the new access password in the WPA pre-shared key text box. Step 6 Select AES from the WPA encryption drop-down combo box. Step 7 Click S

HUAWEI HG622 Home Gateway V100R001 User Guide Issue 02 Date 2010-06-25 Part Number 202193 Huawei Technologies Co., Ltd. provides customers wit

After files are downloaded, you can view file downloading records on the Download History tab. 5.6 Restoring Default Settings You can quickly restor

3. inal is properly connected to the socket through OWER indicator is still off, contact an authorized maintenance Step 2 utes. Then, check L indicat

operator. Step 6 dial-up software to dial successfully, perform 1. n use the PPP dial-up Step 7 proxy server of the d, do as follows: 5. apply to dial

If the problem persists, contact your service provider. What can I do if sometimes the terminal cannot access the Internet through a WLAN connection o

7 Appendix 7.1 Indicators POWER DSL INTERNET WLAN WPS LAN1 LAN2 LAN3 LAN4 USB23456789101 No. Indicator Status Description On The HG622 is powered

No. Indicator Status Description On z The HG622 works in routing mode. z The WAN connection is set up. z No data is being transmitted. Blinking

7.2 Interfaces and Buttons DSL LAN4 LAN3 LAN2 LAN1 RESET POWERON/OFFWPSWLAN1234567981011 No. Interface or Button Description 1 DSL Used to connect H

Description No. Interface or Button 9 WLAN Used to enable or disable wireless network function quickly. 10 WPS Used to set up a wireless connection b

Item Specification Weight About 350 g VDSL2 standardsG.993.2 Annex B PSD Mask ITU G.994.1 (G.hs) ADSL2+ standardITU G.992.5 (G.dmt.bitplus) Annex A

HUAWEI TECHNOLOGIES CO., LTD.Huawei Industrial BaseBantian, LonggangShenzhen 5181

Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any m

Contents 1 Warnings and Precautions ... 1 2 Connecting the Cables and Powering On.

7.2 Interfaces and Buttons...21 7.3 Default Settings...

1 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during opera

Precautions for Using Wireless Devices z When using the device, ensure that the antenna of the device is at least 20 cm away from all persons. z Do no

Maintenance z If the device is not used for a long time, power it off, and then remove all the cables connected to it. z If any exception occurs, for

2 Connecting the Cables and Powering On 2.1 Simple Connection If your telephone line is used for the broadband network access only and if you do not n